FURUNO RD-33 Multifunctional Slave Display

FURUNO RD-33 Slave Display

The RD-33 multifunctional display is suitable for displaying data from linked equipment such as GPS, chartplotter, radar, fish finder, autopilot, instruments and other sensors, including engine information. The 4.3-inch high-contrast color LCD screen can be installed in a compact room and read out remotely from this equipment.

It is a clear screen with large letters that is easy to read. There are a maximum of 6 display modes that can be adjusted to your needs.

DELIVERY INLUDES:

• 4.3" sunlight viewable color LCD (Brightness: 700 cd)
• 6m NMEA2000 Cabel and power plug
• NME2000 en NMEA0183
• installationsmaterial
• hardcover
• 12-24 VDC

Because the RD33 is a capable NMEA0183 and NMEA2000 device, you can use it to bridge both data formats and output the information you desire, in whatever format you desire, to the rest of your onboard network. The RD33 communicates over a NMEA0183 or NMEA200-compatible CANbus network.

CAN bus is a communication protocol that shares multiple data and signals through a single backbone cable. You can simply connect any CANbus device into the backbone cable to expand your network onboard. With CAN bus, IDs are assigned to all devices, and thre status of each sensor in the network can be detected. All CAN bus devices can be incorporated in the NMEA2000 network.

FEATURES:

• Enhanced data legibility thanks to large characters and high resolution display
• Customizable display format from full-screen to a 6-way split screen presentation
• Supports both CAN bus and NMEA0183 interfaces
• Two independent CAN bus input and output ports incorporated for daisy chain networking
• Internal NMEA0183/CAN bus conversion capability available
• RD-33 Slave Display is easy to install

Brochure FURUNO RD-33 SLAVE Display